Modern tall buildings rise from the little ground up,A transformation of urbanization，Demolition operations are increasing，In particular, high-altitude demolition is increasingly common, In the face of such working conditions,how Party A can promote the project safely and effectively and quickly is a headache, It is usually dismantled manually from top to bottom,But the efficiency is too slow, Perhaps it could also consider lifting the excavator to the roof for demolition operations.Although the efficiency is high, but the safety is not sure, Yantai Yite has developed a removal clamp suitable for aerial work.With the excavator extension arm (three section arm) not only high efficiency and safety is also very good.This hydraulic clamp is a single cylinder design, and it is made of wear resistant plate. It weighs 1.8 tons with large opening of 900~1000mm.Combined with the advanced mechanical rotation mechanism greatly reduces the failure rate. The root of the knife body comes with a razor blade.Not only can crush the concrete, but also can shear the steel bars.
The crushing forceps are mounted on the excavator，Driven by an excavator,Combine the movable clamp of the hydraulic crushing fixture,To achieve the effect of crushing concrete，So that the rebar in the concrete can be recycled.Yantai Yite crushing shears include large and medium size , which can be adapted to 5~35 tons of excavator.
It consists of clamp body, hydraulic cylinder, movable jaw and fixed clamp.The fixture body consists of oblique teeth, blades, and common teeth.The crushing shears is installed on the excavator for concrete crushing and steel bar stripping operation.
It has now been applied in the demolition industry.In the demolition process, installed on the excavator, as long as one excavator operator can operate.
Main features :
Using wear-resistant steel welding, reasonable structure, high strength, no deformation.
The operation is simple, sensitive, high production efficiency, low energy consumption.
IT consists of clamp body, hydraulic cylinder, movable jaw and fixed jaw, Mounted on an excavator for use. Through the external hydraulic system to power the expansion of the hydraulic cylinder, control the movable jaw tension of the crushing pliers, to achieve the effect of crushing objects.
Carry out the secondary crushing of concrete, and the separation of reinforcement and concrete.
Unique jaw tooth layout design, double wear-resistant protection, height wear-resistant plate building.
After the load optimization design, the structure is more light and flexible, and the balance between the larger opening size and crushing force.
The work efficiency is two to three times that of the crushing hammer.
It performs a series of operations: the steel bar is separated from the concrete block, bent and loaded onto the truck, significantly improving efficiency.
Operations are fully mechanized, safe and time-saving.
The occlusal compaction gap is small and flexible in operation.
Equipped with a steel bar cutter, It can carry out two operations at the same time, crushing concrete and cut off the exposed reinforcement, so that the crushing operation is more efficient.
Scientific wear plate design is suitable for concrete steel and building columns .The use of reinforced materials improves the durability of the teeth .Using multiple tooth structure, it can carefully break the concrete, save transportation costs. Using internal cutting, it can quickly cut and dismantle buildings.
According to the use of the operator,it can provide appropriate fixed and rotary pliers use oil pressure and rotary motor to conduct complete 360 degree rotary operation, acceleration valve selection, multiple teeth, internal cutting, operation efficiency and continuous technology development,it has been recognized by users all over the world.
Post time: May-19-2023