The quality of excavator hydraulic shear must be strictly controlled

Excavator hydraulic shear production at home and abroad imitate a lot, it is made by the clamp body, hydraulic cylinder, movable blade and fixed blade composition, excavator hydraulic system provides hydraulic pressure for the hydraulic cylinder, so that the hydraulic shear of the movable blade and the fixed blade one and one, to achieve the effect of cutting steel bars and steel plates.

Hydraulic shears are now widely used in the demolition industry and waste disposal operations. At work, it is installed on the excavator, so that only one excavator operator can operate.
excavator hydraulic shear

No.1 Performance Feature:

A Versatility: The power comes from various brands and models of excavators, which truly realizes the versatility and economy of products.

B Safety: The construction personnel do not contact the construction, adapt to the complex terrain safety construction requirements.

C Environmental protection: full hydraulic drive to achieve low noise operation, construction does not affect the surrounding environment, in line with the domestic silence standards.

D Low cost: simple and convenient operation, less personnel, reduce labor costs, machine maintenance and other construction costs.

E Convenience: convenient transportation; Easy to install, just connect the corresponding pipeline.

F Long life: reliable quality, staff in strict accordance with the manufacturer’s manual operation, longer service life.

No.2 Operation principle:

It is installed on the excavator, powered by the excavator, so that the movable blade and the fixed blade of the hydraulic shear are one and one together, to achieve the effect of cutting steel bars and steel plates, and to remove the steel bars and large waste materials in the concrete.

No.3 Operating procedures:

A Connect the perforating pin hole of the hydraulic shear with the perforating pin hole of the front end of the excavator.

B Connect the pipeline on the excavator with the hydraulic shear.

C Borrow the operating system of the crusher, after installation, you can carry out the cutting operation.


Post time: Apr-03-2024