In recent years, the excavator wood grapple with more and more applications in ports and docks, high efficiency, high quality, safety is very popular!
Excavator loading and unloading vehicle wood grapple, respectively, agricultural production system mechanical grapple, fixed grapple, 360 degree rotary grapple, 360 degree rotary grapple with worm gear worm, grab material for Q345B NM400, the use of imported motor configuration, the use of very convenient and flexible. The operation of the grasping machine is simple and quick, replacing the original manual handling,greatly improve the use of work efficiency.
Classification of excavator wood grapple:
1. Rotary excavator wood grapple :
(1)Rotary excavator wood grapple with worm gear, strong structure, the use of integrated motor and gear ring, rotary bearing radial force and axial force can withstand a larger working load, simple installation and convenient operation, no return pipe, oil leakage working principle, use more assured, do not worry about the motor hanging phenomenon, thus providing users with better working benefits.
(2)The rotating part of the excavator rotary grapple without worm gear is divided into separate motor and separate gear ring. However, the rotary excavator wood grapple configured with this product, the radial force and axial force of the slewing support are relatively lower than the integrated slewing support with worm gear, and the installation is more than one oil return circuit, which is simple to install and convenient to operate, because the domestic motor is relatively not very mature, and the use of imported motors will be more worrying.
2.Mechanical excavator wood grapple: It is a cross type (the above 2 grab teeth, the following 3 grab teeth, the design uses the same connecting rod, do not worry about the strength of the structure), simple installation, easy operation, do not need to increase the pipeline and other actions.
3.Fixed excavator wood grapple: also for the cross type (the above 2 grasping teeth, the following 3 grasping teeth, the design does not use the same connecting rod, so one side of the 3 grasping teeth is fixed on the forearm, do not worry about the strength of the structure) simple installation, easy operation, do not increase the pipeline and other actions.
4.Installation accessories for rotary excavator wood grapple: accessories required for modification (1 separate valve, 2 two-way foot valves, 3 tee joints, 1 set of pipes)
5.Standard configuration description: 3-- 5 ton excavator: configuration opening: 1100mm unloading weight (1-3 tons) (mechanical excavator wood grapple, hydraulic rotary) 6--10 ton excavator: configuration opening: 1400mm unloading weight (0-2 tons) (mechanical excavator wood grapple, hydraulic rotary) 11-16 ton excavator: configuration opening: 1700mm unloading weight (0-3 tons) (mechanical excavator wood grapple, hydraulic rotary) 17-22 ton excavator: configuration opening: 2300mm unloading weight (0-5 tons) (mechanical excavator wood grapple, hydraulic rotary) 23-25 ton excavator: configuration opening: 2300mm unloading weight (0-5 tons) (mechanical excavator wood grapple, hydraulic rotary) 26-30 ton excavator: configuration opening: 2500mm unloading weight is (0-8 tons) (mechanical excavator wood grapple, hydraulic rotary) 31-35 tons excavator: configuration opening: 2500mm unloading weight is (0-10 tons) (mechanical excavator wood grapple, hydraulic rotary) 36-40 tons excavator: configuration opening is: 2700mm unloading weight is (0-10 tons) (mechanical excavator wood grapple, hydraulic rotary) 41-45 tons excavator: Configuration opening is: 2700mm unloading weight (0-10 tons) (mechanical excavator wood grapple, hydraulic rotary) The whole body of the excavator wood grapple is made of Q345B wear-resistant manganese steel plate, the front end of the grapple has wear-resistant bucket teeth design, imported rotary motor, fully ensure the quality of the product.
Post time: Apr-17-2024